5×7″ Custom LED (Pair)

These are our official JTX 5″x7″ (sometimes referred to as 6″x7″) ADR compliant LED lights. These headlights are designed to fit any car with single rectangular lights on each side. If your car has twin headlights on each side, see our 4×6 headlights. If you select yes on “Is your vehicle negatively switched?”, you will be supplied with our Smart CANBUS modules for free. These solve the reverse polarity/negative switching issue, whilst also triggering your load sensing relay to allow your blue high beam dash light to turn on. Currently, vehicles we know which require these are: – All Toyotas – Honda Prelude – Mitsubishi Triton – If you’re unsure, please ask us or research some online forums. The DRL Halo is really bright even in full sun light and it goes all the way around the light – not just up the sides. With the white/amber version, the DRL Halo will turn off and flash Amber when indicating, two seconds after indicating the DRL comes back on. All other combinations don’t have an indicator option. The light output is amazing. In High Beam mode the low beam is also on – this is a setting within the light to ensure maximum brightness in high beam. They are indestructible and waterproof. You get ADR certification and according to Qld Dept Transport they are the only ADR compliant light. They are made by us here in Melbourne. Always consider buying Australian Made These are 5″x7″ rectangular headlights and they fit vehicles such as Toyota Hilux (1978-2005), Honda Preludes and wide variety of Ford F-Trucks. Theoretically, any vehicle with single rectangular lights (2 lights in total) should be compatible with these lights. They are made to suit Australian left side of road so popular in old cars being brought to Australia and both lights are identical so no left or right side lights. Specs: Headlight amp draw: 3A each. Halo amp draw: 0.35A each.