KOI POND WATERPROOFING HYDRO SEAL 12.5KG CHARCOAL

KOI POND WATERPROOFING HYDRO SEAL 12.5KG CHARCOAL Compact Waterproofing Solution for Small Ponds & Repairs ⚠️ Professional Waterproofing Sealant – 12.5kg Bucket with Charcoal Finish  Product Overview A smaller, convenient format of the professional Hydro Seal waterproofing system. Perfect for small koi ponds, water feature repairs, and DIY waterproofing projects. Creates a permanent, watertight barrier that integrates with existing structures.  Coverage & Application  Total Coverage: 6m² (3m² after 2 coats) Color: Charcoal ️ Packaging: 12.5kg bucket ⚗️ Mixing Required: Water bonding liquid  Key Features ✅ Rapid Setting – Sets within minutes after application ✅ Damp Surface Friendly – Apply on wet concrete/masonry ✅ Non-Toxic – Safe for fish and plants after curing ✅ Structural Integration – Becomes part of the substrate ✅ Multi-Purpose – Use on ponds, pools, water features, masonry  Technical Specifications Feature Specification Net Weight 12.5kg Color Charcoal Coverage 3m² final (6m² total, 2 coats) Application Brush or trowel Set Time Minutes after application Cure Time 12 hours between coats  Application Guide IMPORTANT TO NOTE: Before you add any liquid, mix the dry ingredients properly to ensure that the active ingredients are distributed evenly. Suggested to use the Promix paint mixer 25kg Powder to 3 liter Bonding Agent to 6 liter Water Combine components in a suitable container, stir continuously to form a thick slurry. Allow the mixture to stand for 2 minutes to activate chemicals, then stir again before application. Apply on pre-saturated surfaces, ensuring coverage of at least 1.5kg per m per coat. Apply coats perpendicular to each other; allow 12 hours curing time between coats. Stir occasionally during application to prevent settling. Apply on pre-saturated surfaces, ensuring coverage of at least 1kg per m2 on 1st Coat and 1/2kg per m2 on 2nd coat Special Instructions: – Ensure surfaces are pre-saturated with clean water before application. – Avoid applying over pooled or running water; use a sponge to damp down if necessary. – Wash pool, pond, dam or any other water containing unit with clean water & soft brush or broom after 12 Hours of last & final coat. Remove unsaturated powders if any with a sponge. Be careful not to drag feet or object over surface. Then fill with water. – Allow adequate curing time before introducing chemicals or fish into water-containing units. – These instructions provide a comprehensive guide for effectively applying Hydro Sealant to achieve waterproofing and structural integrity in various  Ideal For: ✅ Small koi ponds (under 3m²) ✅ Water feature repairs ✅ Fountain waterproofing ✅ Small pool repairs ✅ DIY waterproofing projects ⚠️ Professional Results Require Proper Application Suitable for Projects Up to 3m² Note: Always mix according to instructions and allow full curing before water exposure. DUE TO THE NATURE OF THIS PRODUCT PLEASE ENSURE YOU ORDER THE CORRECT QUANTITY AND SIZE AS NO RETURNS OR REFUNDS CAN BE PROCESSED AFTER DELIVERY.